Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: slowtwitch on September 08, 2013, 08:06:40 PM
-
Hello Folks, I've been running my Mach powered lathe for over a year and have been for the most part very happy with it. The one thing that has puzzled me is the my "Home All" button does not work. Well it does work only after I press the "set home x" and "set home z" buttons. Is this normal???
thanks
pete
-
Dont use the standard screen so not really familiar with its layout and buttons but if you want to attach your xml I will check to see its not a config issue.
Hood
-
Hood, thank you for responding. Here is the file
-
Ok looked at your xml and didnt see an issue with it regarding hming setup so I looked at the default Mach screen. The Home All button is using oem 211 which seems to be broken. You can get round this if you wish by editing the screenset to make it a VB button then once back in Mach you can go to Operator menu then Edit Button scripts and enter the standard code
This will home X then Z
DoButton(22)
DoButton(24)
This will home Z then X
DoButton(24)
DoButton(22)
This will home X and Z at the same time
RefCombination(5)
If you need help with editing the sceenset just shout :)
Hood
-
Hood, your a true treasure to this site ...thank you..
pete