Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: JaguarB on August 10, 2013, 04:33:19 AM
-
I have been successfully running Mach 3 since 2006 on a windows 2000 computer. I have just been given a camera but can not find a windows 2000 driver for it has any one solved this problem?
-
Ahhh - the joys of USB camera's.
In general, the later USB2 camera's contain their driver software and load it automatically as part of the device recognition procedure.
As I found, this does not always work as intended and it took me 3 different camera's before success was achieved - this thread relates http://www.machsupport.com/forum/index.php/topic,22932.msg161339.html#msg161339
If it's any help a general camera driver has been attached.
Tweakie.
-
Thank you for your help but the driver did not match my camera
Hi teck low teck work around
The camera works on xp so I went across to the office and grabbed an old xp machine from the cupboard (office must have the latest tecke kit) fixed it up next to the mill and I am able to display camera image full screen. One slight flaw there is a bit of parallax error from the black cotton that I have used to create the cross hair (just got to modify the recently created wall bracket a bit)
Paul