Machsupport Forum

Third party software and hardware support forums. => Galil => Topic started by: the_kop on July 05, 2013, 06:38:13 AM

Title: mach3+galil 21xx
Post by: the_kop on July 05, 2013, 06:38:13 AM

 >:(please help me now
galil communication error

Problem I want to help fix it.
I run g code for mach3 mill about 2 hours
mach 3 software will stop working and the alarm.
  "galil communication error" and the orange LED is on Broad galil  it turn off.

thank you.
the_kop (Thailand).

Title: Re: mach3+galil 21xx
Post by: the_kop on July 05, 2013, 11:09:00 PM

 ???History status.
LastErrors: a timeout occurred while waiting for response from control.
Before the galil communication error.


thank you.

Title: Re: mach3+galil 21xx
Post by: the_kop on September 21, 2013, 09:18:27 PM

Now I do not have that problem anymore, but I used to change the plug-in  Galil_v45 to Galil1425, I'm not sure it's related or not.


Thank you

the_kop(thailand)