Machsupport Forum
Mach Discussion => Feature Requests => Topic started by: cowpoke on June 25, 2013, 08:47:46 AM
-
Running the latest lockdown version of Mach3.
Have been commissioning a mill with new servo drives and having periodic faults causing Mach3 to stop while running a test program which could be minutes or hours. When Mach drops out, the elapsed time counter keeps counting and if away, I have no way of knowing how long the machine ran before faulting.
Would sure be nice if the timer would only count while a program was running. Any chance this could be changed?
Thanks,
Claude