Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: archer183 on June 17, 2013, 12:00:21 PM
-
So I have a need to get a couple of analog sensors talking with mach 3. I do not see a direct way to interface an analog sensor with mach 3 (appears to be all digital on the inputs). Can anyone suggest a good method for interfacing?
thanks
Greg
-
I have used both the Pokeys and a PLC in the past, also the controllers I now am using (CSMIO/IP-A, IP-S, IP-M) have analogue I/O.
Hood