Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Stone guy on June 09, 2013, 09:11:37 PM

Title: Help with 4th rotating axis
Post by: Stone guy on June 09, 2013, 09:11:37 PM
Hello,
   I am needing to add a 4th rotating axis and need a little help. I am using 2 servos on x with A slaved to x and of course y and z. I am confused as to how to setup a 4th rotating axis. Can I just add one and designate it as b or c? Please can someone point me down the right track?  Thanks   Ron
Title: Re: Help with 4th rotating axis
Post by: Greolt on June 10, 2013, 05:49:42 AM
Better to designate the slaved axis as B or C

This leaves A designator for the 4th axis.

Mach3 will only visually display a rotary toolpath if it is A