Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Regnar on February 14, 2007, 10:22:11 AM

Title: Need a little help
Post by: Regnar on February 14, 2007, 10:22:11 AM

Basically Im not getting any movement out of anything. I tried to run the Road Runner Example, I have tried to jog. I tried to do a simple box from Lcam and nothing is working. I have watched pretty much all of the video's and have even set it up just like Art did and still nothing. Also when I use Lazy Cam it reads to the 6th line in the gcode box but when I run the road runner example it doesnt leave the first line. And the numbers do not get larger or smaller in the Machine Coordinates window either.  I missing something? Thanks for any help. Josh

Title: Re: Need a little help
Post by: Brian Barker on February 14, 2007, 10:37:59 AM

What do you see in the Time in int dro on the diagnostics screen?

Title: Re: Need a little help
Post by: Regnar on February 14, 2007, 10:55:06 AM

It flashes between 1.8 and 2.0

Title: Re: Need a little help
Post by: Regnar on February 14, 2007, 10:59:42 AM

Sometimes its just better to start all over again.  ;D I reinstalled Mach 3 on my Computer and everything works great. Gcode Runs and Jog works. I should have done this 2 days ago but I truley thought I had missed something. Knowing me I probably clicked on something I wasnt suppose to. Thanks for looking into it Brian.