Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: cain on May 09, 2013, 08:53:58 PM

Title: Please Help Me , How can i square up cuts using adjustments on motors
Post by: cain on May 09, 2013, 08:53:58 PM

I bought a Lightning CNC machine motor and had the help me square up my table by adjusting the motors by turning off x and adjusting Y now i cant make the both run together again. PLEASE help

Title: Re: Please Help Me , How can i square up cuts using adjustments on motors
Post by: RICH on May 10, 2013, 06:59:08 AM

Check your config to see that both are enabled.

RICH