Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: 01sporty on February 11, 2007, 10:42:14 AM

Title: Toolpath Display Query
Post by: 01sporty on February 11, 2007, 10:42:14 AM

How difficult would it be to make the toolpath display in LC behave the same as the one in Mach? Personally, I would find it much easier to transition back and forth between the two if they worked in a more similar manner.
Regards,
Walt

Title: Re: Toolpath Display Query
Post by: Brian Barker on February 12, 2007, 03:12:19 PM

IT is not that simple but I can see why you would like to have that... I put it on the board