Machsupport Forum
G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: pcbcnc3020 on April 04, 2013, 11:14:41 PM
-
Hi fellow members,
I recently purchased Mach3 with the free LazyCam beta, and I am experiencing a problem with the importing of drill files. I use a PCB CAD program called SprintLayout 6.0 and export the files as a series of HPGL files. I have the option of exporting the isolation milling file, perimeter cutout file and drill file as separate files, or combine them as one file for export.
I have had good success with milling the isolation paths and cutting the board out to the proper size of my design, but I cannot seem to get the drill files to work. whether I try importing the files separately, or together as one big file, LazyCam never shows the drill holes on the screen.
If anyone has any ideas I am open to suggestions.
Nick D.
-
pcbcnc3020,
There is a manual for LC in Members Doc's. See page 41 for drilling holes.
RICH
-
Rich,
Thank you for replying to my post.
Is the document you are referring to the 123 page LazCam manual, or is it a different one.
-
Yes and it is 123 pages. Here is the link.
http://www.machsupport.com/forum/index.php/topic,12078.msg77415.html#msg77415
RICH
-
Thank You for the information.
Regards,
Nick D.