Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: cut2spec on February 08, 2007, 06:59:22 PM

Title: Help Please with lazy Cam/auto Cad
Post by: cut2spec on February 08, 2007, 06:59:22 PM

i am using auto cad 14 and saving my drawings as dxf files when i try to open these in lazy cam i get an error message that says" no entities found in import"  anyone have any ideas as to what is going wrong?

Title: Re: Help Please with lazy Cam/auto Cad
Post by: ger21 on February 08, 2007, 10:47:32 PM

Try saving as V12 .dxf

Title: Re: Help Please with lazy Cam/auto Cad
Post by: sshneider on February 09, 2007, 08:37:26 AM

LCAM won't see any blocks.  Explode everything in ACAD and resave the dxf and reimport into LCAM.

HTH,
Sid

Title: Re: Help Please with lazy Cam/auto Cad
Post by: corydoras on November 02, 2007, 01:03:38 PM

Old thread, but had the same problem......closed the file in autocad, and the opened it in LC, no problems then.

Mabye it had something to do with it beeing open in write mode in AC, even if it was saved thou


Cory