Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: DMF on March 26, 2013, 10:14:13 PM

Title: fly out screen covers main screen
Post by: DMF on March 26, 2013, 10:14:13 PM

I've switched to a larger monitor and now would like to get fly out screen to appear to right of main screen so that it does not cover the tool path or spindle area. How do I do that? When I have either the main screen up or the main screen with the fly out screen there is blank space to the right of the screens.

Title: Re: fly out screen covers main screen
Post by: Overloaded on March 26, 2013, 10:52:58 PM

You can grab the left edge of the pendant window with a left click and drag it to where you want it.
Then hit TAB to close it, then open it again and it will be back where it was originally. Drag it over again, then close it and re-open it and it will then stick where you last left it. Weird, but yo must do it twice.
Russ

Title: Re: fly out screen covers main screen
Post by: DMF on March 27, 2013, 09:40:37 AM

Doing the grab and move twice worked. Thank You! :)