Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: meko19 on March 26, 2013, 02:08:16 PM

Title: How to Dry Run/Trial Run
Post by: meko19 on March 26, 2013, 02:08:16 PM

I have a 5'x10' CNC plasma controlled by Mach3. I would like to put a pen in place of the plasma torch and be able to draw/check templates ect. I have looked through the Mach3 manuals and support site and can not find anything. Seems like it should be a simple thing to do....Your help is appreciated.