Machsupport Forum
Mach Discussion => Mach Screens => Machscreen Screen Designer => Topic started by: Kenneth on March 26, 2013, 02:06:43 PM
-
is there a setting where i can see in machscreen what i see in mach3 ?
attached explains better.
Thanks
-
Hi Kenneth,
in the picture mach3.png the red led's are using Bitmaps, while in the picture screen.png there are no Bitmaps used. Could it be the referenced bitmap files lie in different directories?
Klaus
-
i made the set file with machscreen. picture files are in the same place.
don't know where mach3 gets it pic files. first location is mostly my
pic. other location is where default pic are
C:\Mach3\Bitmaps
C:\Mach3\Bitmaps\MillBitmaps
-
Hi Kenneth,
please check following Settings in Options -> Settings -> Generic prog Settings :
is the button "Report missing files" checked? If so, does a Message box pop up, when you load the screenset in MachScreen?
Is the "User defined image path" field empty?
Klaus
-
"report missing image files" is checked. and no warning about missing file
pops up when loading file. had that before.
-
Hi Kenneth,
How about:
Is the "User defined image path" field empty?
Klaus
-
no sir,
C:\Mach3\Bitmaps\
-
Hi Kenneth,
please clear that field. If this field is empty, you will have the same look in Mach3 and MachScreen
Klaus
-
cleared the field and same results.
closed mach3 and machscreen. same.
made change in machscreen and saw results in mach3.
but get same placement as pictured here
-
Hi Kenneth,
could you please:
start MachScreen
load screenset
use menu File -> Project Export
in the pop up dialog "Export path" select drive c: Create new Folder c:\ScreenTest click OK
zip directory including subdirectories to C:\ScreenTest
send me the zipped file
klaus.dietz@kd-dietz.de
Klaus
-
Hi Kenneth,
do you have the macropump running, which changes the LED state? Your screen looks OK on my Machine (Mach3 R3.043.022). How is it look like if you set "Red/green LED" to "No" ?
Klaus
-
leds work as they should but pics(image) still look different
-
d### this single pic thing is a pain :)(
-
:)
-
Hi Kenneth,
what do you mean by "leds work as they should but pics(image) still look different" ? What image do you mean?
Klaus
-
the leds is just an image isn't it ?
just shows half of the pic ?
is all i meant.
-
Thats right Kenneth. This link will help you make your own if you want to.
http://www.machsupport.com/videos/movies/leds.wmv
This one is on 2 state led buttons.
http://www.machsupport.com/videos/movies/led_button.wmv
Brett
-
Hi Kenneth,
I still don't understand, where you see the problem. Could it be, you are talking about the letters below the LED's? In that case I would try to place 3 Labels, one for each LED.
Klaus
-
yes, i'll make three labels. Thanks for all ya'll help
-
i made the three labels and this is much better.
Thanks again