Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: B0SC0 on March 23, 2013, 03:09:02 PM

Title: Machine coordinates button doesn't turn red or green or any color.
Post by: B0SC0 on March 23, 2013, 03:09:02 PM

It does toggle my display,  but not sure what mode I am in.

When I press on the button it just kinda' expands and contracts a little.

Win XP Pro on 2.6GHZ Pentium

Just recently purchased Mach3.

Thanks

B0SC0's first post.

Title: Re: Machine coordinates button doesn't turn red or green or any color.
Post by: Hood on March 24, 2013, 04:38:05 AM

Can you attach your xml and I will have a look.
Hood

Title: Re: Machine coordinates button doesn't turn red or green or any color.
Post by: B0SC0 on March 25, 2013, 12:31:52 AM

Here is the attached xml file.
I opened it with the reader and notice red was at 0, not 0.1 as the others.

I tried changing it and saving the xml file, but no change in mach3 after reboot.

So,I ichanged it back to the original.

Any help would be appreciated.

Thank You

B0SC0

Title: Re: Machine coordinates button doesn't turn red or green or any color.
Post by: B0SC0 on March 26, 2013, 11:08:53 AM

Hood, have you had a chance to look at this?

I am considering installing this on another computer to see if it does the same thing.

B0SC0

Title: Re: Machine coordinates button doesn't turn red or green or any color.
Post by: Hood on March 26, 2013, 02:29:09 PM

Sorry missed your last post, will look now.
Hood

Title: Re: Machine coordinates button doesn't turn red or green or any color.
Post by: Hood on March 26, 2013, 02:32:58 PM

Working fine here with your xml so maybe you screenset is corrupt. Try downloading Mach again and installing over the top of itself.
Hood