Machsupport Forum
Mach Discussion => FAQs => Topic started by: dgoddard on March 11, 2013, 08:29:23 PM
-
I'm setting up my 4th axis (rotary). In the Toolpath Configuration flyout there is a box for A-Roatations Enabled; should this be checked? What does it do?
-
"A-Rotations Enabled" tells Mach that the toolpath is of a rotary type for visual display purposes.
You must select this and the correct "Axis of Rotation" for the display to correctly represent the rotary toolpath..
Note; you must also set the "Rotation Radius" DRO to represent the distance that the Z axis origin is offset from the centre of rotation. Or the displayed toolpath will be out of whack.
Also note; only A axis toolpaths will display. Not B or C.
Greolt