Machsupport Forum
Third party software and hardware support forums. => SmoothStepper USB => Topic started by: Mccoy on March 08, 2013, 08:33:44 PM
-
Has anyone heard of a resolution to the problem with connecting limits and e-stops on these boards.
-
I have a USB SS and C25, and I use limits and home switches, and a touch plate with no problems. I just followed the instructions. I did power the SS with a separate 5 v regulated wall wart instead of using USB power. One other thing I did was to use 0.1 μf ceramic capacitors on the inputs to the C25 for noise filtering.
Unfortunately I am not presently close to my machine so I can't furnish other details today.
John Champlain