Machsupport Forum

Mach Discussion => Mach3 under Vista => Topic started by: giana on March 07, 2013, 09:57:43 PM

Title: Z position change after load the NC program
Post by: giana on March 07, 2013, 09:57:43 PM

Guys,
I have a problem with my Mach3 program. Every I load a new program, the Z coordinate will be changing to a certain value.
Please give me your advice for this problem.
Thanks,
Giana

Title: Re: Z position change after load the NC program
Post by: Tweakie.CNC on March 08, 2013, 04:06:42 AM

Hi Giana,

Everybody uses their machines differently but, because I do not use fixture offsets, I uncheck all the DRO related boxes in this part of the General Config. window - this maintains all DRO's at zero on startup and when loading new programs.

I don't know if this helps with your problem.

Tweakie.