Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: ftissera on February 10, 2006, 04:33:05 PM
-
Hello all,
On Mach3 V1.90.07 Can somebody tell me how to remove 2 decimals on all the DRO?
On a machine in decimal read 0.0001mm is not realistic! I would like to read 0.01mm I tested %+.2f format string with Screen4 but the DRO do not function any more after the modification!
Another way ?
Thanks for your help :)
Francis
-
Try this :)
%+.2f
If you need to have NO +- you can use this %.2f
Hope that helps
Brian
-
Brian,
typo sorry, I just changed the "4" by "2" and left the other characters %+.4f becomes %+.2f it is all
With new screen in mach3 the display is +0.00 but the display is blocked to +0.00 when I jog ???
After some tests when a DRO's modified with Screen4 it does not work anymore next even while giving it like as before
Thank you :)
Francis
PS: I hope that you have not any neighbors, your dog is ferocious ;D
-
Brian,
today
1) reload my special 2 digits 1024ft.set in mach3.. don't work !
2) reload org 1024.set.. work fine !
3) reload another time my 1024ft.set and ... work fine :-[
Don't understand but that work ;D
Thanks
Francis
-
It worked here when I tested it... I will keep an eye on it.
Thank you
Brian