Machsupport Forum
Mach Discussion => Mach Screens => Topic started by: Kenneth on February 14, 2013, 02:42:27 PM
-
i have machscreen 1.56 and made a .set. in it i have a MDI label.
near there is an inch/mm toggle. when i open mach3 the MDI label reads
inches. if i toggle the inch/mm button, it changes to mm's. every now and then
it will read right(MDI)
Thanks for any help
-
this is a picture
(http://)
-
am i in the wrong foum for machscreen or mach3 ?
Thanks
-
I would have to look at it in a screen designer to be doing anything but guessing.
Brett
-
Thanks Chaoticone
-
Hi Kenneth,
as Brett said, we would need to have your screenset file to have a deeper look at it. If you would email it, I'll have a look at it.
My email addr: klaus.dietz (at) kd-dietz.de
Klaus
-
i emailed the file Klaus
-
when i use the "auto enlage screen" i get what you said Brett.
just don't know how to remove the extras in machscreen.
even enlarging the frame doesn't show anything.
Kenneth