Machsupport Forum
Mach Discussion => Mach3 under Vista => Topic started by: dfurlano on February 08, 2013, 08:00:20 PM
-
Original system is xp been running it for a very long time here is a screen shot of the port monitor (about in the middle of the screen) and the diagnostics page in Mach.
(http://www.dfurlano.com/Org.jpg)
With Win7 32bit same picture. Notice he port monitor is fine but the Mach diagnostics page is not correct.
(http://www.dfurlano.com/win7-32.jpg)
-
I have given up on Mach. My motherboard finally died and it not worth trying to find a PC that can take dual parallel ports. On to another platform that can use a modern OS and processor.