Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: vector459 on January 30, 2013, 05:47:29 PM
-
Hi, Im using Solid cam with Mach 3 and a Taig mill. I have tried all 3 Solidcam posts on the forum and hte fanuc and I keep getting this strange action?
always when starting the z goes down to like 210mm?
Here is a pic of Mach preview
-
Ended up just purchasing Bobcad V25 after I tested it out. So disregard :) Thanks