Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: skaha on February 01, 2007, 05:34:53 PM

Title: shut down message
Post by: skaha on February 01, 2007, 05:34:53 PM

When in lazycam, if I click on the tool start position on the screen, I immediately get the illegal action and must shut down message from microsoft. Am I doing something wrong or is it a glitch.
Terry

Title: Re: shut down message
Post by: Chip on February 01, 2007, 10:13:46 PM

Hi, Terry

This problem has existed for some time, It doesn't bother some computers, It has been an on-again, off-again problem for me.

The best you can do is use the Reset Origin Min Button for now.

Hope this Helps, Chip

Title: Re: shut down message
Post by: Chaoticone on February 01, 2007, 10:35:52 PM

Hey Fellows,
    An explanation is here.

http://www.machsupport.com/forum/index.php?topic=2349.0

Brett

Title: Re: shut down message
Post by: Brian Barker on February 04, 2007, 10:17:11 AM

I am working on a fix but it will have to be after the next major release