Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: RooT21 on January 18, 2013, 07:28:37 AM

Title: Tangential control A-axis and relay
Post by: RooT21 on January 18, 2013, 07:28:37 AM

I'm new in using the Mach3.I have 4-axis machine and use the tangential control for the rotation A-axis.
On the A-axis is installed electric tool which turns on/off relay.
I'm interested whether in the Mach3 can be set to pause relay and waiting until A-axis is not set up in position.