Machsupport Forum

Support => Downloads => MACH TOOL BOX => Topic started by: BR549 on January 14, 2013, 11:16:41 AM

Title: Turn Probing Wizard
Post by: BR549 on January 14, 2013, 11:16:41 AM
Here is a Wizard for probing in TURN. Fill in the required data and it will probe the part. This wizard does NOT create Gcode and return to mach3 IT probes directly from the Wizard.

As always Test it before you use it.  Iit has new CB code to drive the probing routine.

Unzip the file into the TurnAddons directory.

(;-) TP