Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Len-Tikular on January 13, 2013, 07:36:49 AM

Title: No shuttle detected of type selected
Post by: Len-Tikular on January 13, 2013, 07:36:49 AM

Never had an issue before, but went to use my machine this morning and I have no physical movement of any axis. DRO's respond to keypressess.
I get the message 'No shuttle detected of type selected'
Did I do something with my configuration ? >:(

Title: Re: No shuttle detected of type selected
Post by: Hood on January 13, 2013, 08:13:38 AM

Check to see the Jog On/off button has the green LED round it, if not press it.
Also press Tab screen and see if the Jog mode is set to continuous.
Sounds like you ma have enabled the Shuttle Plugin, if you dont have one disable it.
Hood