Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: lew on January 30, 2007, 09:29:49 PM

Title: Voice question
Post by: lew on January 30, 2007, 09:29:49 PM

I've been going through the pdf manual for Mach 3 and ran across the voice function. If I'm reading it right, a person can initiate a wav file to audibly draw attention to a trigger. Perhaps a machine pause or reset needed or limit switch triggered. Can anyone tell me the details of calling a wav file? Can it be done from within a gcode program. Specifically, I'd like to call an M01 (program pause) and give an audible command like "change the part" or "change the tool". Can this be done? and, if so, how?
Thanks
LEW

Title: Re: Voice question
Post by: Graham Waterworth on January 31, 2007, 03:36:44 AM

Have a look at this posting.

Graham.

http://www.machsupport.com/forum/index.php?topic=799.0

Title: Re: Voice question
Post by: lew on January 31, 2007, 09:28:57 AM

Thanks for the useful info., Graham.
LEW