Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: BR549 on January 03, 2013, 10:40:35 PM
-
HIYA DUDES, I figured out a easy way to USE Deskengrave from inside a Mach3 Wizard. The results is you can create your Engraving code from ANY system FONT then import it into Mach3 FROM the Wizard. From there you can run the Engrave Gcode.
Not sure it would be handy but it appears to be from here.
What do yall think ? worth finishing up???
(;-) TP
-
Added some more features such as partscale and xy extents so you can see the SIZE of the engraving and adjust if needed.
Took a while to find enough VB code to make the shell out and back work correctly and some more time to find enough code to make the auto file load work with DeskEngrave.
Hopefully it Should be usefull to those who engrave. Does arc and angle and straight , Scale up and down
(;-) TP
-
Sounds pretty useful to me, a great idea. 8)
Tweakie.
-
HOLA DONDE PUEDO DESCARGAR EL DeskEngrave WIZARD PARA MACH3 GRACIAS