Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Eradicatore on January 02, 2013, 12:40:30 AM

Title: Is there a way to Auto Zoom to the work area?
Post by: Eradicatore on January 02, 2013, 12:40:30 AM

Hi, I'm new, and I was watching the videos on homing.  I liked how the "display mode" toggle button was showing the whole table, and then auto zooming to the road runner gcode area.  Is there a way other than scroll wheeling all the way in to see just the tool path of the work area.  I.e.  auto zoom to the work area?  Right now even in ALT-4 tool path screen, if I toggle the display mode button, it just shows the table outline or not. 

Thanks!
Justin

Title: Re: Is there a way to Auto Zoom to the work area?
Post by: Eradicatore on January 02, 2013, 12:41:14 AM

This user had the same question at the very bottom of this thread:

http://www.machsupport.com/forum/index.php?topic=12227.0