Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: jones on January 29, 2007, 10:30:46 PM

Title: Turbocad dxf to Gcode?
Post by: jones on January 29, 2007, 10:30:46 PM

I draw in turbocad, explode it 1,2,3 times try to convert it to mach3 and it always comes out in 2d. I must be missing something
Thanks for any help on this

Title: Re: Turbocad dxf to Gcode?
Post by: Chip on January 29, 2007, 11:09:03 PM

Hi, Jones

LazyCam is 2.5 D, you import 2D, add the .5 D in bottom rt corner.

Best I now thats the way it is.

Hope this Helps, Chip