Machsupport Forum
Mach Discussion => Video P*r*o*b*i*n*g => Topic started by: Paul4865 on December 28, 2012, 09:24:52 AM
-
Hello all and a merry Christmas to you, during the holidays I had decided to install the Mach 3 Blue screen probing to help me ref the machine more accurately, this has all gone well. my question is how do I change the speed the axis moves while it is searching for the contact plate, it defaults on my machine to 4, which with my gearing is past the time allowed to find the contact, just need a steer on where this speed is driven from.
thanks in advance.
Paul.
-
it would be in the button script, I think.
Operator/Edit Button Script
then click on the button
John