Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: sparky3 on February 07, 2006, 11:14:12 PM

Title: mach 3 screen having problem.
Post by: sparky3 on February 07, 2006, 11:14:12 PM

i am having a problem changing a screen.  on the first screen i added 3 new dro's wanted them to show machine cord. at all time no matter what i do with the work cord. system.  i read the screendesigner book.  and pluged in oem codes 83, 84, 85 and the dro's work but when i change the machine cord.button to show work cord's under the original dro's. it also changes the new dro's that i added.  i hope this makes sense.  is their any thing i am missing on doing this. or can it not be done?

thanks for your help.

Title: Re: mach 3 screen having problem.
Post by: Brian Barker on February 08, 2006, 05:29:27 AM

It is all working here... could you give me a bit more?

Title: Re: mach 3 screen having problem.
Post by: Art on February 08, 2006, 07:53:22 AM

Hi:

  Are you sure you checked the OEMcode box? The codes your using shouldnt change with selection, they should just show the machine coords at all times..

Art

Title: Re: mach 3 screen having problem.
Post by: sparky3 on February 08, 2006, 05:44:48 PM

ok my machine just made a big liar out of me.  when to try it and it works i did check the oem code buttons before.  it does give a message before it closes the dro window "the hot key just duplicates another on function = -1 oem code 0 at x=431 y=740" . what does that mean?  thanks for your time guys.