Machsupport Forum

Mach Discussion => Mach SDK plugin questions and answers. => Topic started by: marsheppard on November 22, 2012, 03:58:24 AM

Title: New to Mach 3 - Can you help me set it up
Post by: marsheppard on November 22, 2012, 03:58:24 AM
Hi
Just bought a router, bit confused by mach 3 program.  Looking to pay a designer or CNC/mach 3 professional who can do the set up for me.  I have the machine, I have the completed CAD files (all are simple 2d cuttings).  Just need somoene to set  up mach 3 program to get me ready to cut.  Can anyone help?
thanks
Title: Re: New to Mach 3 - Can you help me set it up
Post by: Tweakie.CNC on November 23, 2012, 12:27:46 PM
Hi and welcome to the forum.

My best advice is that you read the Mach manuals http://www.machsupport.com/documentation.php then ask specific questions on the points that you are uncertain about.

It is, in my opinion, better that you learn the setup for yourself - then if anything goes 'pear shaped' you will have an understanding of the problem.

Tweakie.
Title: Re: New to Mach 3 - Can you help me set it up
Post by: Ya-Nvr-No on November 23, 2012, 01:16:28 PM
You might list your location someone in your area might be able to assist.