Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Chaoticone on January 25, 2007, 10:07:45 PM

Title: Hot Rod Machining
Post by: Chaoticone on January 25, 2007, 10:07:45 PM

Does anyone know where I can get a 3d model of a 69 Camaro or a 65 Corvette that I can use to generate code?

Brett

Title: Re: Hot Rod Machining
Post by: GaryB on January 26, 2007, 08:42:26 AM

Have a Harley if that helps ;)

actually you might try 3dcafe.com they have a bunch of freebie 3d's or Turbosquid.com
I"m sure if you do a google you will find a bunch more

Title: Re: Hot Rod Machining
Post by: ardor on January 26, 2007, 07:18:37 PM

How big is your table for probing? ;D

Title: Re: Hot Rod Machining
Post by: Chaoticone on January 26, 2007, 07:52:46 PM

Thanks Gary, I'll check those out.



Ardor, you are a mess. If you will send me the model. I will find a big enough table.  ;D


Brett

Title: Re: Hot Rod Machining
Post by: turmite on January 30, 2007, 12:00:13 PM

http://www.smcars.net/forums/index.php

Be prepared to spend way too much time there if you like cars. Most are modeled in 3ds but some are in Rhino.

Mike

ps spend time looking at the same model from different modelers. Like everything else.....some are better than others.

Title: Re: Hot Rod Machining
Post by: Chaoticone on January 30, 2007, 12:42:12 PM

Thanks Turmite,
    Looks like a great site for this.



Brett

Title: Re: Hot Rod Machining
Post by: Yodawill2000 on February 02, 2007, 04:56:32 PM

What are you getting yourself into Brett !!!

looks like fuuuun    ;D

Title: Re: Hot Rod Machining
Post by: Chaoticone on February 02, 2007, 07:27:48 PM

LOL....................Box wood derby at the Scout Hut.

Brett