Machsupport Forum
General CNC Chat => Show"N"Tell ( What you have made with your CNC machine.) => Topic started by: GRAYHIL on November 19, 2012, 02:00:47 PM
-
Hi all
Heres where I am up to.
Graham
-
Very nice workmanship Graham. That is certainly going to be a time piece to be proud of.
Tweakie.
-
Ditto!
What are you using to cut these beautiful works?
Dave
-
Hi All
2 Axis Colchester Master Lathe which can be converted to a 4 axis cnc mill by swapping the toolpost with a vertical side and then adding a rotary table if required.
Drawn with autocad then coordinates used to manually create program.
All parts have been created this way.
Graham
-
What will you use for the fusee chain and where will you get it?
-
Hi Damianp
I used 1.6mm phosphor bronze multi stranded wire.
The nearest I can find now is 1.4mm from http://www.johnwardle.co.uk.
OR 1.5MM from http://www.clockmaking-brass.co.uk/miscellaneous_items%202.htmL
Best of luck.
Graham
-
Very nice!
Excellent workmanship.
Ray
-
Very nice! Way to go Graham!
-
Been 2 years now.
Did you Git er dun Graham ?
Need pics !
-
Hi All
See video
http://youtu.be/MnGHoMqAMzY
Graham
-
Excellent work Graham - thanks for posting the video link, it's nice to see it in action.
Tweakie.
-
That is most certainly an excellent job ! Thanks Graham !
I can just imagine the cat tryin' to get at that ball.
Russ
-
This will go in my little book of favorites! Awesome!
Brett
-
Fanstastic!
Vince