Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: cowpoke on November 14, 2012, 08:33:11 PM

Title: Configuration problems with latest lockdown version
Post by: cowpoke on November 14, 2012, 08:33:11 PM

Running XP Pro, service pack 3, Mach3 mill, Mach3 R3.043.066

Sometimes when trying to load the General Config screen, that screen never displays and Mach freezes. Then trying to either shut down or restart windows, windows gets to the "Shutting Down" screen and never completes. Never had this problem with Windows until the Mach freeze. At that point I have to unplug the computer to get windows up again.

Is there somewhere I can download an older version of Mach3? Maybe a year old as the previous version I had on the machine never gave a minutes trouble.

Thanks
cem

Title: Re: Configuration problems with latest lockdown version
Post by: ger21 on November 14, 2012, 10:30:08 PM

On the first line of this page, where it says "Click Here", you'll find a bunch of older versions in the Mach folder when the FTP site opens.
http://www.machsupport.com/downloads.php