Machsupport Forum
Mach Discussion => Mach SDK plugin questions and answers. => Topic started by: v tec on November 14, 2012, 04:33:34 PM
-
hi from france, someone can explain me how it work?
http://www.machsupport.com/plugins.php
because i need a plug in for recording a gcode, with the jog (motion for arm robot)7
thanks
-
Download the file, then run (double click) the saved ‘jcode.m3p’
Within Mach3:- Config / Config Plugins enable JCode
Restart Mach3
Title Bar :- select Jog -> GCode / Record Jogs / select File / set Feedrate
Return focus to Mach screen and jog axis to required position
select Record Point
Repeat the above 2 operation as necessary (you may need a few hours to spare here :) )
Then click OK to save the GCode.
This plugin has perhaps been superseded by the improved ‘Copy Cat’ wizard which is a lot easier to use but unfortunately requires the NFS Wizards licence.
Tweakie.
-
You can also see a tutorial video here (click on the JCode link on the left):
http://www.machsupport.com/videos/
Dave
-
thanks very much, but i have a question
how we can do for record the 6 axis? (xyzabc)
because actually it record only xyz, it s a good start, but i need to record the 6 axis for my arm robot
-
I am afraid you will have to write your OWN application for that.
(;-) TP
-
We cant modify this plug in?
I have never write or open a plug in
-
if i open the plug in with vs20XX, i can maybe modify something? i don t know how that work