Machsupport Forum

Third party software and hardware support forums. => SmoothStepper USB => Topic started by: ainnovations on November 03, 2012, 01:50:03 PM

Title: USB SS FRO issues
Post by: ainnovations on November 03, 2012, 01:50:03 PM

Hey All,

This is my first time posting, but I have frequented this forum for the past year to find solutions to my problems.  Today I cant seem to find a solution.

When running a program i cannot get a change in the FRO to take affect unless I "feed hold" then press cycle start again.  I am using R3.043.66 for Mach, and plugin v17f for the SS.  I have also had issues with Mach loosing its place when hitting feed hold in the middle of a program.  

Any help/advice would be appreciated.

Thanks

Will

Title: Re: USB SS FRO issues
Post by: ainnovations on November 03, 2012, 09:38:23 PM

I ran across this posting, I will check my settings and see if this solves my Issue.

http://www.machsupport.com/forum/index.php/topic,22229.0.html