Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Dave on January 24, 2007, 09:40:48 AM

Title: Input past end of File
Post by: Dave on January 24, 2007, 09:40:48 AM

I use Autocad to produce drawings which I then convert to dxf files for use on Mach3. When I try to load the file for conversion I often get an error of 'Input past end of File' which then prevents the dxf file from loading.

Any help would be most appreciated

Regards

Dave

Title: Re: Input past end of File
Post by: Graham Waterworth on January 24, 2007, 01:36:14 PM

try to output the file in an older format, maybe acad 2000.

Graham.