Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: bdrotaru on October 20, 2012, 01:39:12 AM

Title: Dynamic control of cutting speed
Post by: bdrotaru on October 20, 2012, 01:39:12 AM

Is there a way to dynamic control speed (with potentiometer) for plasma machine?

Title: Re: Dynamic control of cutting speed
Post by: Hood on October 20, 2012, 04:43:27 AM

If you use something to get an analogue signal in to Mach then you can use the pot to control  the Feed Override.
Hood