Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Jack Hoffa on October 16, 2012, 07:15:40 PM

Title: run small program with a switch
Post by: Jack Hoffa on October 16, 2012, 07:15:40 PM

This is probably old stuff
I need to run a short program from a switch (with the main program loaded)
I already run the main program from another  switch.

G91G0X 3.5 (feeds 3.5in of wire)
M7 (Cuts wire with a Solenoid)
M9 (Releases Cut Solenoid)

We are making a Twist Tie machine w/2 servos - Runs on Mach 3 - works great - have a patent

Is this do-able ?

Also am going to need some help with Screen Design soon - Like to hear from anyone interested with price

Thanks

Jack Hoffa
jack.darlene.hoffa@roadrunner.com
714-990-5980   Cell 714-404-7159

Title: Re: run small program with a switch
Post by: BR549 on October 16, 2012, 08:23:25 PM

OH I do believe you can run as many programs as you have buttons to push from a single master program(;-) 

(;-) TP