Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: tantan on October 12, 2012, 01:45:40 PM
-
hi,
i use the auto calculator tool with a toch screen to enter values in the dro's. but the decimal point is not working.
tantan
-
When using the calculator, always enter a "0" (or some digit) before the decimal point.
Like this .... 0.4375
Russ
-
hi,
tnx for your reply. i always do that but even 12.56 dus not work. the decimal point is not working at all.
tantan
-
Might be associated with your touch screen set-up.
Wish I could help there but have no experience with them.
Regards,
Russ
-
hi russ,
it has nothing to do with touchscreen drivers. if you would be so kind just select auto calculator in the operator menu. now you can fill in a value in an dro with your mouse. if you try for example 34.89 you will find that 34. will work but the 89 you cannot fill in.
tnx
tantan
-
I did try it before first posting and it works fine here.
Are you using the standard Mach screen ?
If not, the dro might not be set to accept decimal entries. (%+.2f)
-
hi,
i solved it. it has to do with country settings in windows. i configured dutch (netherlands). after i configured English (US) it works!!
thanks!
tantan
-
Bravo !
I'll try to remember this one for future reference.
Thank YOU !
Russ
-
Yes, there was a French guy had the same issue, thought at first it may be because he was using a laptop but ended up it was the language option he had set. He set the keyboard to UK and it worked fine.
Hood