Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: vasco.carvalho on October 09, 2012, 06:50:28 AM

Title: Read an analog input from DSPMC-V2 with MACH3
Post by: vasco.carvalho on October 09, 2012, 06:50:28 AM

Hello I'm using a DSPMC-V2 and MACH3. I already have motors, connectors etc... everything works well.
But, now I need read a analog input and I don't know how.
I'm using the pin "analog input 0" of the connector "J2-ANALOG I/O".

Thank you
Vasco Carvalho
Portugal

Title: Re: Read an analog input from DSPMC-V2 with MACH3
Post by: Hood on October 09, 2012, 09:20:53 AM

Probably best asking this on the DSPMC part of the forum.
Hood