Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: jezx on October 07, 2012, 11:00:27 AM

Title: setting G0 movement ??
Post by: jezx on October 07, 2012, 11:00:27 AM

hi , im new here , collin from novs scotia cananda .  i have been running a syil x6 3axis mill for  about a year . ive got most g code  stuff down pretty well  .
what id like  to do is set my G0 rapid travel to a slower setting  but i dont know  how .
  why ?? i just find its pretty fast and slinging a 200+ lbs table  around or the head up and  down is not good in the long run . also it would give me a lil more time to react if i messed up :) im also never in a hurry so half the speed its running would be  fine with me .
thanks

Title: Re: setting G0 movement ??
Post by: ger21 on October 07, 2012, 11:03:04 AM

Reduce the velocity setting in Motor Tuning

Title: Re: setting G0 movement ??
Post by: jezx on October 07, 2012, 01:10:51 PM

thanks , i looked  around but i didnt think of  the motor tuning   .  im now setting it for 50''/m  insted of 124''/m  . also droped the excelleration .
nothing wrong with droping the excelleration is there ??   . my machine has vfd motors insted of stepper... i think .