Machsupport Forum
Third party software and hardware support forums. => NC Pod => Topic started by: rcrabb on January 18, 2007, 08:38:39 PM
-
I just noticed that the output controlling my spindle stays high when you shut down mach. If I toggle the output high and shut down mach the output stays high. This may cause some safety concerns.
-
Ryan,
I agree I have tested it and you are right I have also noticed that when Mach 3 recieves an e-stop from the pod, it does not pull the output lines down either, I will have this fixed as soon as I can contact Art. I won't bug him this weekend, but first thing monday I will.
Regards
Dave