Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Esteve on August 31, 2012, 01:02:56 PM

Title: HOMEMADE THC
Post by: Esteve on August 31, 2012, 01:02:56 PM

Hello everyone. Some time ago I made a PLASMA cutting machine, it works great, but has no THC. I was excited GET MYSELF AND ME CIRCUIT COPY OF THE BOOK OF MACH 2.
 CIRCUIT HAVE DONE, BUT NOT AS is physically connected to the parallel port OR CUTTING MACHINE. MY CONTROL PROGRAM IS THE MACH 3

 Deputy CIRCUIT THE PICTURES. If someone could help I would be grateful.

 And THANK YOU SOON



(http://img43.imageshack.us/img43/570/circuitthc1.jpg) (http://imageshack.us/photo/my-images/43/circuitthc1.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)


(http://img23.imageshack.us/img23/191/circuitthc2.jpg) (http://imageshack.us/photo/my-images/23/circuitthc2.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

Title: Re: HOMEMADE THC
Post by: Shane Schuller on February 17, 2013, 06:39:01 AM

Hi Steve

Did you succeed with your THC?

And what book are you referring to?

Title: Re: HOMEMADE THC
Post by: stirling on February 18, 2013, 04:37:58 AM

Esteve - IMHO I wouldn't waste your time trying to implement this. It's a very old and basic design and even the guy that designed it (Tom Caudle from CandCNC) has recommend many times (on cnczone) that you don't use it.

Ian