Machsupport Forum

Third party software and hardware support forums. => Promote and discuss your product => Topic started by: purelogic on August 17, 2012, 07:45:39 AM

Title: Purelogic USB tiny Mach3 motion controller PLCM-LPT2
Post by: purelogic on August 17, 2012, 07:45:39 AM

Purelogic RnD new USB tiny Mach3 motion controller PLCM-LPT2

Interface: STEP/DIR/ENABLE
Max. freq: 100KHz
Size: 86x82x20
Pins: 1 port (same to standard LPT ports), 12 "out" and 5 "in" pins. All ins and outs are buffered.
Site: http://plmotion.com (http://plmotion.com)

Main features:

•    USB Full-speed connection
•    Up to 6 axes, 100kHz pulsing engine
•    PWM spindle control
•    Probing
•    Torch Height Control
•    Slave Axis support
•    Soft limits
•    Easy firmware update
•    DB25F connector to reproduce standard LPT connection
•    DLL for direct access to controller could be provided

(http://www.purelogic.ru/images/cms/data/plcm_lpt_900.jpg)