Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: customfabrication on July 30, 2012, 08:41:06 PM

Title: z in gcode
Post by: customfabrication on July 30, 2012, 08:41:06 PM

I am able to post my dxf file to gcode in lazycam....but when i open it in Mach3.....the z starts goes to 60 and then goes all the way back to 0 before anything actually happens....how do i get it to stop doing this?

Title: Re: z in gcode
Post by: RICH on July 31, 2012, 06:57:17 AM

Have a read of  Tutorial #6 in the manual.
RICH