Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: aldepoalo on July 27, 2012, 01:04:17 PM
-
I know mach 3 has a macro for using a C axis drag knife. Why question is if you are cutting a start shape. All the video's I've seen show cutting profiles like an ellipse or arc. What happens when you cut straight lines at different angles. Will the C axis align with the cut for each line of a star. Tool up over down, cut line, up rotate down cut line etc etc.
Any information on this would be great.
-
I think you are referring top a tangent Knife function not a drag knife. The drag knife is free floating for rotation. The tangent is axis controlled and follows the direction of XY movement.
Just a thought, (;-) TP
-
You are right