Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Johnny Storm on July 15, 2012, 09:12:22 PM
-
Hello, I have a plasma CNC table... the machine works fine the problem is when I use the Feed Hold and then when I hit the Cycle Start buton the machine goes crazy and moves in wrong direction.
My Mach3 is Ver. 3.043.062 and yes is full licenced
I make a video of this problem: http://www.youtube.com/watch?v=pD3PCP3r2gs (http://www.youtube.com/watch?v=pD3PCP3r2gs)
-
SOLVED - just change DISTANCE MODE and IJ MODE to ABSOLUTE, and then change to absolute in my CAM Software too
-
Are you still online man?